PSC1764HDB - 重载转向驱动桥
发布人： 日期：2013-05-24 来源: 点击量：7604
可应用于50-55吨越野轮胎起重机（可在中国生产供货），转向驱动桥技术特点：
- 该驱动桥为满足越野轮胎起重机的重载作业要求专门开发， 承载能力达到 22680 KG
- 提供多种不同的速比选择， 可满足用户的专用要求
- 满足不同的轮距安装要求
- 满足重载作业长工作寿命要求的 大传动系统扭矩， 大轮胎， 大载荷
- 可选限滑差速， NO-SPIN差速， 标准差速， 满足不同牵引性能的需要
- 通过选用标准的输入端密封和标准转向半轴，降低维护要求和维护成本
- 桥壳选装磁性体， 通过吸附金属颗粒， 提高换油周期内的工作质量
- 标准配置轮边双钳液压盘式制动器， 选装输入端停车制动器
- AXLETECH行星驱动桥坚固耐用， 满足绝大多数恶劣工况的使用要求
|
AXLE CAPACITY(1) Pounds (kg)
|
AVAILABLE DIFFERENTIALS
|
DIFFERENTIAL RING GEAR DIAMETER
AND FACE WIDTH
Inches (mm)
|
AVAILABLE OVERALL RATIOS
|
|
Rough Terrain Crane
50,000 (22,680)
|
Standard, Limited Slip Differential or NoSPIN®
|
RS145 Series
15.31" (388.9)
2.06" (52.3)
|
12.40-30.4:1.0
|
|
Reach Truck
55,000 (24,950)
|
|
Log Loader
40,000 (18,100)
|
A
AXLE MOUNTING CENTERS
Inches (mm) |
B
HUB FLANGE TO FLANGE
Inches (mm) |
TIRE SIZE
Inches (mm) |
BRAKES
Inches (mm) |
PLANETARY WHEEL-END RATIO |
D
KING PIN
INTERSECTION
Inches (mm) |
|
38.5" (978)
|
100.94" (2,564)
|
25" (635)
|
18.5" x .63" HDB
(470 x 16)
|
4.235:1.0
|
77.5" (1,969)
|
Approval required on all applications.
.jpg)
EXAMPLE: TYPICAL AXLE WEIGHT
PSC1764 with 100.94" (2,564 mm) hub flange to flange and HDB Brakes = 2,925 lbs. (1,327 kg)
OIL CAPACITY: (Estimated)
Carrier 40 pints (19.0 liters)
Wheel end 8 pints (3.82 liters) each
A) Axle Mounting Centers
B) Hub Flange to Flange
C) Carrier Standout with 18N Input Yoke 15.94" (404.9 mm)
and 14.46" (367.3mm) with 1270 Spring Apply/Hydraulic
Release Input Park Brake and 72N Yoke
D) King Pin Intersection
上一页:PSC826HDB - 重载转向驱动桥下一页:PSC1794HDB - 重载转向驱动桥