您当前的位置:首页 >> 公司产品 >> 电器系统 >> 意大利COBO >> DC-DC转换器/油门踏板/保险盒
油门踏板
发布人: 日期:2013-06-14 来源: 点击量:5314
EPD
ELECTRONIC PEDAL DEVICE
 
Product description
COBO EPD (Electronic Pedal) has been designed to be installed in vehicles equipped with the electronic controlled diesel, gasoline or electric engines through ECU interface. It can be anyhow installed in vehicles with traditional electro-hydraulic actuators if coupled with the proper actuator.
COBO EPD pedal has been manufactured using robust materials and advanced assembling procedure. It can be installed on cabin floor of any machine. Due to its die-cast aluminum frame, stainless steel mechanic and nylon superstructure, it guarantees maximum traveling comfort and operating safety during off-road heavy duty use. Reliability is guaranteed by severe environmental and electrical tests.
COBO pedal is using angular contactless hall effect type sensor, it is "redundant" and programmable. This unique feature is necessary to comply the most severe safety international regulations and programmability allows to configure pedal output signals ready to be used with any available engine in the market. COBO EPD is full programmable and it allow 5 points linearisation of the characteristic.
It is available with analogue or PWM or CAN BUS for a direct link with the latest engine control units available.

Data sheet
 
 
Analogue version
Power supply:5V±10%
Logic power consumption: typical 17mA。Hall effect linear position sensor
Output type:Sink/Source
Linearity:±3% or better
Output current:typical 2,5mA
Sink/source: (Vs>4,5V)
Response time:1,8ms
Load dump field decay:±45V
 
Reverse polarity protection,Total full electronics resin finish,Independent circuit for IVS

CAN-BUS version
Power supply:8÷30 V
Logic power consumption:25mA typical,Hall effect linear position sensor
Output type:CAN-BUS 2.0B (11 or 29-bit), ISO 11898-2 compliance, max. 1 Mbit/s
Linearity:±3% or better
CAN message rate:= 10ms
Load dump field decay:±45V
 
Reverse polarity protection,Total full electronics resin finish,Independent circuit for IVS

MECHANICAL AND RATING
Operative temperature range:-30°c to 80°C
Connector:Deutsch DT 04-6p (6 poles)
Ingress Protection: IP69K (for all electric parts)
Expected Mechanic Lifetime:106
Material:Frame,Aluminum:Pedal,PA6

 

上一页:保险盒下一页:无
公司产品 | 典型应用 | 技术服务 | Export Products

北京欣达立成工程技术有限公司@版权所有 010-84724571 备案号:京ICP备14008345号-1